Drives and Controls Magazine
Home
Menu

40kW ironless motors will propel airships to the edge of space

01 May, 2005

40kW ironless motors will propel airships on the edge of space

A Californian company has developed a 40kW-plus ironless core motor to propel unmanned, solar-powered airships designed to hover on the edge of space, 21km above the earth`s surface. The multi-role, high-altitude airships (HAAs) are being developed by Lockheed Martin under a $40m-plus contract from the US Department of Defense.

The prototype 40kW motor (above) - thought to be the largest of its type, with the highest torque-to-weight ratio - has been developed by AeroVironment, a company specialising in innovative technologies for energy-efficient systems and unmanned aerial vehicles. The motor (shown above) is designed to deliver large amounts of torque and to operate at part-load efficiencies of more than 98%.

The 150m-long, 50m-diameter airships - 25 times larger than the familiar Goodyear-type blimps - will stay in position for months at a time, performing duties such as observing the weather, carrying out surveillance, and relaying telecommunications signals. One possible military role could be to track low-flying missiles that might slip beneath earth-based radar systems.

The airships (shown in an artist`s impression above) will be able to carry payloads of up to two tonnes. The four motors will power the 10m-diameter propellers to maintain the airships in the required position. Up to 10kW of power will come from thin-film solar cells mounted on the airship`s surface. Excess power will be stored in on-board batteries. Later versions of the HAA may carry fuel cells.

A prototype of the HAA is due to be tested next year. Around ten of the airships will be needed to provide overlapping coverage of the USA`s coastal regions.